categorycontentpage

v1.9.0.1

PARTS CATALOGUE

EDT100/101

Product Information

Specialized test bench for all common rail pumps

Common rail pumps
Common rail injectors
Common rail piezo injectors
Pump injector systems

The modern design of the test bench enables the specialist to check and adjust components of the diesel system, including pumps as well as Common Rail injectors and pump injector systems.

Thanks to the ongoing development of test records for all of the systems and the generation of new accessories, the EDT 100 is equipped to meet any market requirements.

EQUIPMENT COMPOSITION

EDT 100 – LDFT0001
EDT 101 – LDFT0002 

 

EQUIPMENT 

EDT 100 – LDFT0001

REF.  
LDFT0097 EUI-PDE-EUP-EMD-UPS CAM BOX
LDFT0099 PIEZO ADAPTOR
LDFT0098 FULL KIT OF MANAGEMENT SOFTWARE FOR UIS-PLD INJECTORS
  + BIP (BEGINNING INJECTION POINT) + DUAL COIL
LDFT1162 FULL CR PUMPS KIT
LDFT1163 CAM BOX KIT

 ACCESSORIES - UIS/PLD/PDE SYSTEMS

EDT 100 – LDFT0001

REF. UIS/PLD/PDE SYSTEMS
LDFT0140 CAM BOX ADAPTOR – SIEMENS – AUDI – VOLKSWAGEN INJECTORS
LDFT0141 CAM BOX ADAPTOR – VOLKSWAGEN – AUDI PDE80
LDFT0142 CAM BOX ADAPTOR – LAND ROVER DISCOVERY – DELPHI BEBE2A00001
LDFT0143 CAM BOX ADAPTOR – IVECO CURSOR 430 – PDE100
LDFT0144 CAM BOX ADAPTOR – CATERPILLAR 3176-3196-C12-C10
LDFT0145 CAM BOX ADAPTOR – VOLVO 420-460 – DELPHI – BOSCH
LDFT0146 CAM BOX ADAPTOR – IVECO CURSOR 350
LDFT0147 CAM BOX ADAPTOR – VOLVO PLD1A
LDFT0148 CAM BOX ADAPTOR – CATERPILLAR C13
LDFT0149 CAM BOX ADAPTOR – MERCEDES ATEGO PLD100
LDFT0150 CAM BOX ADAPTOR – MERCEDES ACTROS PDL110
LDFT0151 CAM BOX ADAPTOR – CUMMINS CELECT IMS-L10-M11-N14
LDFT0152 CAM BOX ADAPTOR – MACK – RENAULT – DAF – KHD - PLD100-110 TYPE B
LDFT0153 CAM BOX ADAPTOR – DETROIT DIESEL 50-60
LDFT0154 CAM BOX ADAPTOR – DETROIT 5234770-5235575
LDFT0155 CAM BOX ADAPTOR – 3406E C15
LDFT0156 CAM BOX ADAPTOR – SCANIA PDE100S 2006
LDFT0157 CAM BOX ADAPTOR – VOLVO 420 – BOSCH 460
LDFT0158 CAM BOX ADAPTOR – VOLVO 500HP – DELPHI E1-E3 – HYUNDAI
LDFT0159 CAM BOX ADAPTOR – AUDI – VOLKSWAGEN PDE 80.2 (NEW)
LDFT0160 CAM BOX ADAPTOR – M11 CUMMINS 3411754
LDFT0161 CAM BOX ADAPTOR – IVECO STRALIS 500 HP EURO 5
LDFT0162 CAM BOX ADAPTOR – BOSCH – VOLVO – PENTA
LDFT0163 CAM BOX ADAPTOR – CATERPILLAR 3500 ELECTRONIC
LDFT0164 CAM BOX ADAPTOR – EUP DELPHI
LDFT0165 CAM BOX ADAPTOR – DEUTZ-CULLIMAN-SAME 101
LDFT1171 CAM BOX ADAPTOR – CATERPILLAR MECHANICAL INJECTOR SERIES 3500 – 4P9076
LDFT0166 CAM BOX ADAPTOR – DELPHI KCCOT120A0020 FOR PERKINS
LDFT0167 CAM BOX ADAPTOR – CATERPILLAR MECHANIC 1.1 – 3116
LDFT0168 CAM BOX ADAPTOR – NISSAN 440
LDFT0169 CAM BOX ADAPTOR – DETROIT 4 PIN – FE4E00001
LDFT0170 CAM BOX ADAPTOR – DETROIT SERIES DDEC V – 0414703003/5
LDFT0171 CAM BOX ADAPTOR – PF (0414693006)
LDFT0172 CAM BOX ADAPTOR – DELPHI SMART INJECTOR

 

ACCESSORIES - OTHER INJECTION SYSTEMS

EDT 100 – LDFT0001

REF. OTHER INJECTION SYSTEMS
LDFT1153 HEUI KIT
LDFT1154 L´ORANGE KIT
LDFT1155 SCANIA – CUMMINS HIGH PUMPS KIT
LDFT1156 PERKINS – CATERPILLAR C6 HIGH PUMPS KIT
LDFT1157 MTU INJECTORS KIT
LDFT1161 BOSCH – CP4 CR PUMPS FOR EDT 100/101
  CRIN INJECTORS KIT

 

EQUIPMENT - COMMON RAIL

EDT 101 – LDFT0002

REF. COMMON RAIL
LDFT0002 CONFIGURATION FOR CR INJECTORS
LDFT1162 FULL CR PUMPS KIT
LDFT1164 FULL CR INJECTORS KIT

Technical specifications

EDT 100 – LDFT0001
EDT 100 – LDFT0002

 

DRIVE SYSTEM

MOTOR 3 PHASE 400 VAC (3 phases + 1 earth + 1 neutral)
POWER 11 kW – 15 Hp
FREQUENCY 50/60 Hz
SPEED RANGE 30 – 3500 Rpm
SPEED CONTROL Digital and automatic selection using the software application
WHEEL Dimensions 50 Kg/m
Inertia 1.8 Kgm2

  

MEASUREMENT SYSTEM 

REPEATABILITY PRECISION ± 1% RD
TEMPERATURE RANGE -20 to +80 °C
MAXIMUM PRESSURE 0.98 MPa
INJECTION TIME MEASUREMENT Incorporated nozzle response time sensors
UNIT OF MEASUREMENT Electronic measurement of mass in mg/hit or mm3/hit
Resolution of 0.2 mg and precision of 0.2%
Temperature not sensitive and not affected
No mobile parts that will fail

 

IT SYSTEM

OPERATING SYSTEM Microsoft Windows 7 or above
SOFTWARE EAGLE
SCREEN 15‘’ touchscreen
CONNECTIONS Ethernet and USB

 

FEED SYSTEM

OIL TANK 60 l
FUEL PUMP 12 l/minute
REFRIGERATION Integrated refrigeration system: without water – without air
SUPPLY TEMPERATURE 0 to 65 °C
RETURN TEMPERATURE 0 to 65 °C
MAXIMUM PRESSURE 2000 Bar
FILTRATION Capacity up to 3μ

 

DIMENSIONS

HEIGHT 1,980 mm
WIDTH 2,180 mm
DEPTH 1,560 mm
VOLUME 6.5 m3
WEIGHT 1,150 kg
BODY CONSTRUCTION Nickel-plated iron
SAFETY DOOR Transparent plexiglas protector
Immediate stoppage of the motor if it opens

 

INFORMATION SYSTEMS

MULTIBRAND All brands
TEST RECORDS
  • Generation and storage of test records
  • Printing of reports with achievable reference values
SETTINGS Personalised data tables
UPDATING Permanent over the internet
SOURCES Original specifications of the automobile manufacturers

 

APPLICATIONS 

  • CARS
  • LIGHT COMMERCIAL
  • HEAVY COMMERCIAL
  • AGRICULTURAL

 

 

Further Information